Many people are using mobile power, but we often don't need to use it for a long time. Mobile power manufacturers remind you that we should store it properly when you don't use it. Mobile power should be stored in a dry environment, and it's best to put it back into the box immediately after use. This can effectively protect the mobile power, because rain, moisture and various liquid electronic components and circuits will cause the corrosion of the mobile power, which may reduce the service life of the mobile power, or even directly damage the mobile power chip. At the same time, mobile power manufacturers remind you that mobile power cannot be stored in high temperature, which will also shorten the life of mobile power, damage the battery and age some plastics. You can't throw or knock mobile power in a rough way, which is a bit burdensome for Xiaobian. For more information about Huajiaqiang technology, or if you have the needs of mobile power manufacturers, Mobile power manufacturers remind you to pay attention to several issues when using mobile power products: A. the output voltage of the mobile power supply must be within the range of 5±0.5V, otherwise, some brands of mobile phones cannot be charged; B. The transfer connector must match. The principle of use of mobile power products is to charge digital devices through USB cable. One end of the cable with USB interface is connected to mobile power products, while the other end is connected to digital devices. Therefore, the interface of the other end must be consistent with the interface of digital devices, otherwise it cannot be charged. In addition, the internal resistance of USB cable cannot be too large, which will lead to too long charging time or even charging failure if it exceeds the normal standard. C, mobile power supply should be handled in a dry environment. Rain, moisture and various liquids or moisture will corrode electronic components and circuits. D. Mobile power supply cannot be stored in high temperature. High temperature will shorten the life of electronic devices, damage batteries and age some plastics. E. Do not throw or knock the mobile power supply in a rough way. Rough use may damage the internal circuit board and precision machinery.
